Transformer enables Larson Electronics go lights to 106 watts to be run from wall outlet -11 amp m(-12 Volts). the Larson Electronics dcp-11-dp waterproof power supply converts commonly used 100 - 277VAC electrical current to 12Vdc at11 amps. This converter includes a typical straight blade plug on the Input end and a 2 prong deutsch connector on the output end. This converter can operate with voltages within the 100-277vac range and converts it to 12Vdc, allowing users to use standard AC power to operate equipment like our LED and hid lights that require 12 volt dc current. The dcp-11-dp 106 watt power converter provides a safe and effective way for users to tap into and utilize common 100 to 277 volt AC power sources and convert this current to 12 Volts dc or 24 Volts dc for use with equipment that requires 12/24 volt dc electrical power. This unit can be operated with Input current ranging from 100 to 277 vac and will output 12 volt dc current at 11 amps or 24 volt dc current at 6.25 amps. This power converter features an IP67 rated waterproof design, making it suitable for indoor or outdoor use and includes integral short circuit and overload protection that will shut down the unit in case of faults and overloads to protect the unit and connected equipment from damage. Click photo to enlarge click photo to enlarge click photo to enlarge this converter comes with a straight blade plug on the Input lead and a two pin deutsch connector on the output lead, allowing users to simply plug the unit into a typical wall outlet, then connect any of our 12 volt lights equipped with deutsch connectors. Most of our 12 volt LED lights and ledlb, ledlb-e, ledp series lights as well as many of our hid units utilize deutsch connectors, making this unit "plug-n-play" compatible. This converter will also work with our hml-1, cml-1, cml-2, hml-2, cml-3, hml-3 and cml-4 and hml-4 series spotlights.
